This handy snare support will get you up and running in absolutely unbelievable time! The #11 gauge wire is welded fast to 1/4" round stock. All you do is take your foot and step it into the ground. That's it. All that's left above the ground is about 10" of the 1/4" stock material so that it looks like another small limb. You have about 20" of 11 gauge wire to make your set. So simple, so fast, just step your support wire in, and the set is ready to hang.

When we were looking for a body grip support to handle and put on our website, we were amazed by the numerous supports available. With that being said, we wanted our trappers to be able to cover about any base with a removable body grip support, plus make it affordable. This support is so very unique that your trap can be set in the usual upright position, or you can keep that trigger system down in the water where it's not going to freeze or pick up surface junk every night. It comes in 3 different sizes, is a simple and straight forward system, and is rugged and ready for trap line use. I think you will agree that anything that maes or keeps you versatile in trapping is a plus.

This handy snare support will get you up and running in absolutely unbelievable time! The #11 gauge wire is welded fast to 1/4" round stock. All you do is take your foot and step it into the ground. That's it. All that's left above the ground is about 10" of the 1/4" stock material so that it looks like another small limb. You have about 22" of 11 gauge wire to make your set from. So simple, so fast, just step your support wire in, and the set is ready to hang.

2 prong coyote drag, 3/8 inch diameter

Coon Creek DP setter

When we were looking for a body grip support to handle and put on our website, we were amazed by the numerous supports available. With that being said, we wanted our trappers to be able to cover about any base with a removable body grip support, plus make it affordable. This support is so very unique that your trap can be set in the usual upright position, or you can keep that trigger system down in the water where it's not going to freeze or pick up surface junk every night. It comes in 3 different sizes, is a simple and straight forward system, and is rugged and ready for trap line use. I think you will agree that anything that maes or keeps you versatile in trapping is a plus.

When we were looking for a body grip support to handle and put on our website, we were amazed by the numerous supports available. With that being said, we wanted our trappers to be able to cover about any base with a removable body grip support, plus make it affordable. This support is so very unique that your trap can be set in the usual upright position, or you can keep that trigger system down in the water where it's not going to freeze or pick up surface junk every night. It comes in 3 different sizes, is a simple and straight forward system, and is rugged and ready for trap line use. I think you will agree that anything that maes or keeps you versatile in trapping is a plus.

This little tool is great for the budget, and also for the trapper that is going way back in where weight is an issue. Also, it can be used as an extra if your main tool is lost. It sure beats another trip back in to reset, or a night with no trap set until you can get in there and reset. Light weight, quick, easy, and locks up so you can get your safety on.

**OUT OF STOCK**

3 pound--$8.95
This drag measures 8x14 with two 2/5 inch drag spikes, one on each side. Your catch just is not going far with this drag hooked up on 8-10 feet of chain.

The conibear safety pin is American made, powder coated, and has a nylon lanyard to attach if you should drop it.  The great thing with this tool is it keeps you completely out of the firing system, even as you remove this at set completion.  You, your clothing, and hands, are totally clear of the firing system.  That alone will sell this tool.  To anyone that has had the misfortune of being accidentally pinched in on of these big body grippers, you will appreicate this tool the moment you take it from the package.  Bright colored so it can be found in the water, the leaves, or in the mud.

This is another great tool in our line of setters.  There are two different size slots in these setters to handle coils from 1 1/2 all the way up to those big #3 and #4 coils.  Gives the user an extension on the levers to either use your hands, or works great with your shoes or boots.  Also gives you plenty of room to keep those levers down and get it set.  Safer, and no injury at the same time, making a job much easier.  Try these safe, time saving setters.

This handy snare support will get you up and running in absolutely unbelievable time! The #11 gauge wire is welded fast to 1/4" round stock. All you do is take your foot and step it into the ground. That's it. All that's left above the ground is about 10" of the 1/4" stock material so that it looks like another small limb. You have about 20" of 11 gauge wire to make your set. So simple, so fast, just step your support wire in, and the set is ready to hang.

A simple, secure system to attach any trap onto any style sliding hardware. Compatible with 3/8" - 1/2" stock, 3/32" -1/8" cable, 14 gauge - 9 gauge wire. Pre-assembled: toggle, heavy dutyy swivel, 6" #2 chain and slide.

Product of Coon Creek Trappers and Bearded Man. All materials made in the U.S.A. No tools needed.

2 per pack

Totally redesigned and fits any size body grip trap.

This item is available in standard and large sizes

All new design!  One handed skinning gambrel.

This gambrel has been in use in our fur shed for years.

The Sullivan's trap pan tester is a handy tool used to measure the pan tension on your trap. Each mark represents 1 pound of pressure. The trap pan tester takes out all the guesswork! For fox and bobcats we recommend 2-3 pounds. For coyotes 3-4 pounds is good. When set the pan should not move until the animal puts some weight on the trap. This will help eliminate toe catches.

When we were looking for a body grip support to handle and put on our website, we were amazed by the numerous supports available. With that being said, we wanted our trappers to be able to cover about any base with a removable body grip support, plus make it affordable. This support is so very unique that your trap can be set in the usual upright position, or you can keep that trigger system down in the water where it's not going to freeze or pick up surface junk every night. It comes in 3 different sizes, is a simple and straight forward system, and is rugged and ready for trap line use. I think you will agree that anything that maes or keeps you versatile in trapping is a plus.

Easily removes a 2" dirt hole.  Just pound this tool in, twist, and then remove.  It's a really easy way to get a bunch of sets in quickly.  It's made of all metal construction, and is approximately 19" long.  It has a handy t-handle built on to make it simpler to extract.

This is a 2 pound hammer for all of your trapping needs.  It comes with a digging wedge welded to the off-hammer side.  It has an all fiberglass handle, and is a brilliant red color so that you don't forget it at the set location.  This tool works well in dirt trapping, or along the water line.  It's also great for the trapper that does a lot of walking or packing where every pound is critical.

This handy snare support will get you up and running in absolutely unbelievable time! The #11 gauge wire is welded fast to 1/4" round stock. All you do is take your foot and step it into the ground. That's it. All that's left above the ground is about 10" of the 1/4" stock material so that it looks like another small limb. You have about 22" of 11 gauge wire to make your set. So simple, so fast, just step your support wire in, and the set is ready to hang.

This tool has been used by trappers everywhere for years.  Countless sets have been put in by this great trapper's tool.  It comes with a hammer and cutting edge on the head of the tool.  The upper part is a great shove/trowel, and when used in this manner, the hammer and cutting blade make a great t-handle.  This tool also can be used as a dirt hole punch.  Simply pound the shovel part in at your hole location, twist the head, pull, and remove.  Tool length is approximately 19".

This is the tool for every trappers work bench.  Totally redone, it is now a fine-tuned piece of equipment.  Makes J-hooks, swivels, baseplate rods, cotterpins, and more.  You will find plenty of uses for this fine tool.

When we were looking for a body grip support to handle and put on our website, we were amazed by the numerous supports available. With that being said, we wanted our trappers to be able to cover about any base with a removable body grip support, plus make it affordable. This support is so very unique that your trap can be set in the usual upright position, or you can keep that trigger system down in the water where it's not going to freeze or pick up surface junk every night. It comes in 3 different sizes, is a simple and straight forward system, and is rugged and ready for trap line use. I think you will agree that anything that maes or keeps you versatile in trapping is a plus.